The new version of Common.Logging assembly is 100% binary backwards compatible to previous versions. Either you rebuild your project against the new version or simply specifiy an assembly version redirect:

<configuration>
  <runtime>
     <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
        <dependentAssembly>
           <assemblyIdentity name="Common.Logging" publicKeyToken="af08829b84f0328e" culture=""/>
           <bindingRedirect oldVersion="0.0.0.0-65535.65535.65535.65535" newVersion="2.0.0.0"/>
           <!-- reference specific file: -->
           <!-- codeBase version="2.0.0.0" href="../../../build/net/2.0/release/Common.Logging.dll"/ -->
        </dependentAssembly>
     </assemblyBinding>
  </runtime>
</configuration>

Those who implemented their own Common.Logging.ILoggerFactoryAdapter and Common.Logging.ILog interfaces, need to update their code to the extended interfaces coming with version 2.0. For convenience Common.Logging comes with a couple of support classes, making this task as easy as possible as described in Implementing a custom FactoryAdapter

Logging configuration can be done declaratively in your app.config

<configuration>
  <configSections>
    <sectionGroup name="common">
      <section name="logging" type="Common.Logging.ConfigurationSectionHandler, Common.Logging" />
    </sectionGroup>
  </configSections>

  <common>
    <logging>
      <factoryAdapter type="Common.Logging.Simple.ConsoleOutLoggerFactoryAdapter, Common.Logging">
        <arg key="level" value="DEBUG" />
        <arg key="showLogName" value="true" />
        <arg key="showDataTime" value="true" />
        <arg key="dateTimeFormat" value="yyyy/MM/dd HH:mm:ss:fff" />
      </factoryAdapter>
    </logging>
  </common>
</configuration>      

	Note
	The concrete set of <arg> elements you may specify depends on the FactoryAdapter being used.

Note that if you have installed Common.Logging in the GAC, you will need to specify the fully qualified name of the assembly, i.e. add the Version, Culture, and PublicKeyToken, etc. See the log4net section for an example.

You may manually configure logging by setting a LoggerFactoryAdapter in your code.

// create properties
NameValueCollection properties = new NameValueCollection();
properties["showDateTime"] = "true";

// set Adapter
Common.Logging.LogManager.Adapter = new Common.Logging.Simple.ConsoleOutLoggerFactoryAdapter(properties);      

	Note
	The concrete set of properties you may specify depends on the FactoryAdapter being used.

This is the default FactoryAdapter if logging is not configured. It simply does nothing.

ConsoleOutLoggerFactoryAdapter uses Console.Out for logging output.

TraceLoggerFactoryAdapter uses System.Diagnostics.Trace for logging output. For viewing it's output you can use any tool that is capable of capturing calls to Win32 OutputDebugString() - e.g. the tool "DebugView" from www.sysinternals.com.

There are two implementations, both configured similarly.

The only difference is in the type specified to the factory adapter. Both Adapters accept the following configuration properties:

The example below will configure log4net 1.2.10.0 using the file log4net.config from your application's root directory by calling XmlConfigurator.ConfigureAndWatch():

<configuration>
  <common>
    <logging>
      <factoryAdapter type="Common.Logging.Log4Net.Log4NetLoggerFactoryAdapter, Common.Logging.Log4net">
        <arg key="configType" value="FILE-WATCH" />
        <arg key="configFile" value="~/log4net.config" />
      </factoryAdapter>
    </logging>
  </common>
</configuration> 

For log4net 1.2.9, change the assembly name Common.Logging.Log4Net129.

Another example that shows the log4net configuration 'inline' with the standard application configuration file is shown below.

<configuration>
  <configSections>
    <sectionGroup name="common">
      <section name="logging" type="Common.Logging.ConfigurationSectionHandler, Common.Logging" />
    </sectionGroup>

    <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/>
  </configSections>

  <common>
    <logging>
      <factoryAdapter type="Common.Logging.Log4Net.Log4NetLoggerFactoryAdapter, Common.Logging.Log4Net">
        <arg key="configType" value="INLINE" />
      </factoryAdapter>
    </logging>
  </common>

  <log4net>
    <appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender">
      <layout type="log4net.Layout.PatternLayout">
        <conversionPattern value="%date [%thread] %-5level %logger %ndc - %message%newline" />
      </layout>
    </appender>

    <root>
      <level value="DEBUG" />
      <appender-ref ref="ConsoleAppender" />
    </root>

    <logger name="MyApp.DataAccessLayer">
      <level value="DEBUG" />
    </logger>
  </log4net>
</configuration>

Note that if you are using Common.Logging or any of the adapters from the GAC, you will need to specify the full type name, including verison, publickey token etc., as shown below

<configSections>
  <sectionGroup name="common">
    <section name="logging" type="Common.Logging.ConfigurationSectionHandler, Common.Logging,
                                  Version=2.0.0.0, Culture=neutral, PublicKeyToken=AF08829B84F0328E"/>
  </sectionGroup>
  <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net,
                                Version=1.2.10.0, Culture=neutral, PublicKeyToken=1B44E1D426115821"/>
</configSections>
<common>
 <logging>
   <factoryAdapter type="Common.Logging.Log4Net.Log4NetLoggerFactoryAdapter, Common.Logging.Log4Net,
                         Version=2.0.2.2, Culture=neutral, PublicKeyToken=AF08829B84F0328E">
     <arg key="configType" value="FILE-WATCH"/>
     <arg key="configFile" value="~/log4net.config"/>
   </factoryAdapter>
 </logging>
</common>

There is one implementation.

The example below will configure NLog using the file NLog.config from your application's root directory by calling XmlLoggingConfiguration(string):

<configuration>
  <common>
    <logging>
      <factoryAdapter type="Common.Logging.NLog.NLogLoggerFactoryAdapter, Common.Logging.NLog">
        <arg key="configType" value="FILE" />
        <arg key="configFile" value="~/NLog.config" />
      </factoryAdapter>
    </logging>
  </common>
</configuration> 

Another example that shows the NLog configuration 'inline' with the standard application configuration file is shown below.

<configuration>
  <configSections>
    <sectionGroup name="common">
      <section name="logging" type="Common.Logging.ConfigurationSectionHandler, Common.Logging" />
    </sectionGroup>

    <section name="nlog" type="NLog.Config.ConfigSectionHandler, NLog"/>
  </configSections>

  <common>
    <logging>
      <factoryAdapter type="Common.Logging.NLog.NLogLoggerFactoryAdapter, Common.Logging.NLog">
        <arg key="configType" value="INLINE" />
      </factoryAdapter>
    </logging>
  </common>

  <nlog xmlns="http://www.nlog-project.org/schemas/NLog.xsd"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <targets>
      <target name="console" xsi:type="Console" layout="${date:format=HH\:MM\:ss} ${logger} ${message}" />
    </targets>
    <rules>
      <logger name="*" minlevel="Debug" writeTo="console" />
    </rules>
  </nlog>
</configuration> 

There is one implementation located in the assembly Common.Logging.EntLib and is linked against the Microsoft Enterprise Library v 3.1, aka EntLib 3.1. The .dlls for EntLib can not be redistributed so you will need to download EntLib separately.

There are no configuration options for the adapter. Configuration of EntLib logging is done entirely though App.config. The example below shows the basic configuration of the EntLibLoggingAdapter

<common>
  <logging>
    <factoryAdapter type="Common.Logging.EntLib.EntLibLoggerFactoryAdapter, Common.Logging.EntLib"/>
  </logging>
</common>

Future releases may include configuration of the priority and also the format in which information about an exception is logged. The current priority used is -1, the default.

Note that the following mapping of Common.Logging LogLevel to System.Diagnostics.TraceEventType is used.

There is one implementation located in the assembly Common.Logging.EntLib41 and is linked against the Microsoft Enterprise Library v4.1, aka EntLib 4.1. The .dlls for EntLib can not be redistributed so you will need to download EntLib separately.

There are no configuration options for the adapter. Configuration of EntLib logging is done entirely though App.config. The example below shows the basic configuration of the EntLibLoggingAdapter

<common>
  <logging>
    <factoryAdapter type="Common.Logging.EntLib.EntLibLoggerFactoryAdapter, Common.Logging.EntLib41"/>
  </logging>
</common>

Future releases may include configuration of the priority and also the format in which information about an exception is logged. The current priority used is -1, the default.

Note that the following mapping of Common.Logging LogLevel to System.Diagnostics.TraceEventType is used.

There are 2 ways of integrating with System.Diagnostics.Trace: Either you redirect all log messages from System.Diagnostics.Trace to Common.Logging or vice versa. Logging from Common.Logging to System.Diagnostics.Trace is done by configuring TraceLoggerFactoryAdapter.

To configure System.Diagnostics.Trace to route its output to the Common.Logging infrastructure, you need to configure a special TraceListener:

<configuration>
   <system.diagnostics>
      <trace>
         <listeners>
            <clear />
            <add name="commonLoggingListener"
                 type="Common.Logging.CommonLoggingTraceListener, Common.Logging"
                 initializeData="LogLevel=Trace" />
         </listeners>
      </trace>
   </system.diagnostics>
</configuration>

This configuration causes all messages logged via System.Diagnostics.Trace.Write to be logged using a logger instance obtained from LogManager by the "name" attribute and using the LogLevel specified in the "initializeData" attribute.

f you want to plug in a new, yet unsupported logging library, you need to provide a logger factory adapter that implementes the Common.Logging.ILoggerFactoryAdapter interface. Loggers must implement the Common.Logging.ILog interface.

Important: Any implementation must provide a public constructor accepting a NameValueCollection parameter as shown in the example below:

public class MyLoggingFactoryAdapter :  ILoggerFactoryAdapter
{
  public MyLoggingFactoryAdapter(NameValueCollection properties)
  {
    // configure according to properties
  }

  public ILog GetLogger(Type type) { ... }

  public ILog GetLogger(string name) { ... }
}

For convenience, Common.Logging comes with an abstract base class Common.Logging.Factory.AbstractCachingLoggerFactoryAdapter for easier implemention of factory adapters and Common.Logging.Factory.AbstractLogger for implementing loggers.

In the case your application uses frameworks that are tied to different logging systems, one usually had to find a workaround yourself. Using Common.Logging removes this problem: All integration modules come with plugs to route log messages in 2 directions - either send messages from Common.Logging to the 3rd party logging system, or you can feed messages from that other logging system into Common.Logging.

Let's assume, one of your frameworks uses log4net, another one System.Diagnostics.Trace. You prefer the small but powerful NLog system. First you need to configure log4net to send all log events to Common.Logging:

<log4net>
    <appender name="CommonLoggingAppender"
              type="Common.Logging.Log4Net.CommonLoggingAppender, Common.Logging.Log4Net">
        <layout type="log4net.Layout.PatternLayout, log4net">
            <param name="ConversionPattern" value="%level - %class.%method: %message" />
        </layout>
    </appender>

    <root>
        <level value="ALL" />
        <appender-ref ref="CommonLoggingAppender" />
    </root>
</log4net>

<system.diagnostics>
  <sharedListeners>
    <add name="Diagnostics"
         type="Common.Logging.Simple.CommonLoggingTraceListener, Common.Logging"
         initializeData="DefaultTraceEventType=Information; LoggerNameFormat={listenerName}.{sourceName}">
      <filter type="System.Diagnostics.EventTypeFilter" initializeData="Information"/>
    </add>
  </sharedListeners>
  <trace>
    <listeners>
      <add name="Diagnostics" />
    </listeners>
  </trace>
</system.diagnostics>

<nlog autoReload="true" throwExceptions="true">
 <targets>
  <target name="common.logging"
          type="Common.Logging.NLog.CommonLoggingTarget, Common.Logging.NLog"
          layout="${longdate}|${level:uppercase=true}|${message}"
          filename="C:\temp\${date:format=yyyy-MM-dd}_logA.txt"/>
 </targets>
 <rules>
  <logger name="*" minlevel="Info" writeTo="common.logging" />
 </rules>
</nlog>